Page 213 - Foxled-Catalogo-Elstead_Exterior-2019

extended life, especially when in coastal areas. For all models, we highly recommend that exterior fittings are cleaned once per year with fresh water and oiled
or waxed to give longer service. Lenses and glasses also benefit from cleaning but take care with polycarbonate or acrylic as these materials can easily scratch
if any abrasive cloth is used.
3. IP RATINGS. All exterior fittings have an IP (Ingress Protection) rating which is a declaration of how much protection any product has against the ingress
of both water and dust / particles. The minimum rating for an outdoor luminaire exposed to rain should be IP23 and the maximum can be up to IP68 (this
can vary in different countries) which means the fitting is submersible. Most of our fittings are IP44 or greater and some of the Landscape models are up to
IP67 meaning they can be covered by water up to a depth of 150mm, such as in-ground lights. See table below for full classifications. Typically, the higher the
numbers, the higher the performance.

IP RATINGS
1st Short Description 2nd Short Description
Digit (Protection against ingress of solid bodies) Digit (Protection against ingress of moisture)

0 Non-Protected 0 Non-protected
1 Protected against solid objects greater than 50mm dia. 1 Protected against dripping water falling vertically greater than 50mm diameter
2 Protected against solid objects greater than 12mm dia. 2 Protected against dripping water when the Luminaire is tilted up to 15° from its normal position
3 Protected against solid objects greater than 2.5mm dia. 3 Protected against spraying water falling on the Luminaire at any angle up to 60° from the vertical
4 Protected against solid objects greater than 1mm dia. 4 Protected against splashing water from any angle
5 Dust-protected 5 Protected against water jets from any direction
6 Dust-tight 6 Protected against powerful water jets
7 Protected against immersion in water under defined conditions
8 Protected against continuous submersion under manufacturers specified conditions

Example IP65 Dust-tight and protected against water jets from any direction.

COMPLIANCE/APPROVALS
All products within this catalogue conform with the European Union Low Voltage Directive, BS EN 60598-1:2008, the product standard for luminaires
recognised across Europe and all fittings are CE marked. Every luminaire is individually tested by Elstead Lighting to ensure that the product is electrically
sound and meets the company’s quality standards. A unique test / batch number is then applied to the fitting. Please contact us for further details or advise
us of your local needs.
We are manufacturing members of the UK Lighting Industry Association and conform to all aspects of the Lighting Industry Association Code of Practice
for luminaire production.

ENERGY RATINGS FOR LUMINAIRES
Please see the relevant energy rating label for the corresponding lamp holder type. Please note that, with the very large number of lamp options available in the
market, it is impossible for our luminaires to accurately reflect all choices. But all lamps able to be bought in the market should have their own dedicated energy
rating performance clearly stated on their packaging.

LIGHTING

This luminaire is This luminaire This luminaire contains
compatible with bulbs contains built-in built-in LED lamps and
of the energy classes: LED lamps. has sockets for bulbs of
the energy classes:
A ++ A ++ L A ++ L
A + A + E A + E
A A D A D
B B B
C C C
D D D
E E E

The lamps cannot be changed The LED lamps cannot be
in the luminaire. changed in the luminaire.
874/2012 874/2012 874/2012

All luminaires with replaceable lamps. Dedicated LED fittings. Some of our luminaires combine
Incandescent, fluorescent or LED. built-in LED with replaceable lamps.

ELSTEADLIGHTING.COM 213